Two appliances, a real bay controller, a signal injection kit and a lightweight SCADA. No slides standing in for the product. Bring your toughest substation integration question and we'll try it on the rig.
To show the whole chain without a live substation, our secondary signal injection kit feeds signals to the bay control unit (BCU). SignalForge Edge reads the BCU and sends the data two ways: to a lightweight SCADA, and to a historian and EMS.
Walk through the full signal path on a table, with real equipment at the bay end.
SignalForge Edge sends the same data to a lightweight SCADA for operators and to a historian and EMS for analysis.
The kit drives the demo. It is not a calibrated test set and is not a replacement for one.
A 15 to 20 minute walk-through at the booth, built around the problems DISCOM substation teams raise most often.
SubstationSynk Edge simulates IEC 61850 IEDs and bays, with MMS and GOOSE traffic, so SCADA and protection schemes can be checked on the bench instead of the field.
Working productSignalForge Edge takes data from a real bay controller and presents it to an operator system over open protocols. No replacement of primary equipment.
Working productA lightweight operator view shows the bay data live. A substation load limiter shows which feeders it would shed, by priority. It advises only and sends no commands.
Demo conceptMixed vendors, mixed generations, limited downtime. These are the three things we focus on today.
IEC 61850, IEC 60870-5-104 and 101, DNP3, Modbus and OPC UA on one data path, for brownfield and new substations alike.
Status, alarms and trends from substation devices in one view, built on the Deliverain Pulse data layer.
Passive monitoring of substation and SCADA networks with 180-day log retention, built to the CERT-In 2022 directive.
Each is available as a turnkey Edge appliance or as software for your own hardware. Pricing is quoted per requirement.
IEC 61850 simulation, testing and integration. Up to 20,000 nodes per instance, 10 concurrent sessions, built-in network sniffer.
Datasheet (PDF)Details
Protocol gateway and simulator. IEC 61850, 60870-5-101/103/104, DNP3, Modbus, OPC UA. PROFINET in development.
Datasheet (PDF)DetailsTell us who's coming and what you'd like to see. We'll hold a time at Booth 13, The Lalit, Jaipur and send a reminder.
This opens your email app with the details filled in. Prefer to write directly? contact@deliverain.com · +91 95918 15060
